TimberTech Vintage
TimberTechPVC
From $250 per m² across Australia, inc GST
$176.80 per 4.88 m board
Set your state
4 colours: pick one to see it
- Board size
- 140 × 25 mm4.9 m or 6.1 m lengths
- Cap
- Not published
- Core
- Not published
- Fixing
- Face screws or hidden clipsCortex screws with colour-matched plugs (square-edge boards)
- Warranty
- 30 years, residential
- Joist centres
- Not published
Profiled, not yet in the designer
Colours (4)
Photos are the maker’s, credited. Render colours are sampled from the maker’s swatch images and are indicative only: order a sample before you choose.
Specifications
Every published fact, with its source and the day it was checked.
- 14025
Deck board 140 × 25 mm · 4.9 m, drawn with core not stated, cap not stated, square edges
- 14025
Deck board 140 × 25 mm · 6.1 m, drawn with core not stated, cap not stated, square edges
- 14025
Deck board 140 × 25 mm · 4.9 m, drawn with core not stated, cap not stated, grooved on both edges for hidden clips
The board
| Fact | Published value | Source · checked |
|---|---|---|
| Material | PVC (no wood fibre) | James Hardie web page · checked |
| Deck board | 140 × 25 mm, square edges · 4.9 m lengths How this was readProduct code 920078. Designed for face fixing with Cortex screws and colour-matched plugs. Effective cover width 140 mm. | James Hardie web page · checked |
| Deck board | 140 × 25 mm, square edges · 6.1 m lengths How this was readProduct code 920079. | James Hardie web page · checked |
| Deck board | 140 × 25 mm, grooved both edges · 4.9 m lengths How this was readProduct code 920072. Designed for CONCEALoc hidden fastener clips and screws. Heat-bending capable (curves). | James Hardie web page · checked |
Installation
| Fact | Published value | Source · checked |
|---|---|---|
| Fixing: face screw | Cortex screws with colour-matched plugs (square-edge boards) | James Hardie web page · checked |
| Fixing: face screw | Cortex 316 stainless steel screws for coastal applications | James Hardie web page · checked |
CONCEALoc hidden fastener clips and screws (grooved boards) | James Hardie web page · checked |
Tested performance
| Fact | Published value | Source · checked |
|---|---|---|
| Bushfire attack level (AS 3959) | BAL-29 · wording: Engineered to meet requirements for BAL-29 areas; conditions: Suitability depends on the site, application and required BAL; confirm with the builder/certifier and refer to technical documentation (not yet published). How this was readNo test report, certificate, subframe or enclosure conditions published. | James Hardie web page · checked |
| Slip resistance (AS 4586) | P5 (wet pendulum) How this was read"The Vintage Collection achieves a P5 slip resistance rating". The page does not name the test standard (P-classes are AS 4586 wet-pendulum classes); no test report published. | James Hardie web page · checked |
Warranty
| Fact | Published value | Source · checked |
|---|---|---|
| Warranty, residential | 30 years How this was read30-year residential product warranty. Fade/stain resistance is described as covered under the product warranty ("James Hardie's warranties with respect to fading are set out in the TimberTech product warranty"; staining claim assumes install/maintenance to technical literature) but no fade/stain term in years is stated and the warranty document is "Coming soon". | James Hardie web page · checked |
| Warranty, commercial | 15 years How this was read15-year commercial product warranty; "subject to the applicable terms, conditions, and installation requirements". | James Hardie web page · checked |
Other published facts (1)
Other published facts
| Fact | Published value | Source · checked |
|---|---|---|
| Recycled content (as published) | average 55% recycled material, including plastic waste How this was readFAQ: "contains an average of 55% recycled material". | James Hardie web page · checked |
Every fact here carries its source and the day it was checked. Documents opened 6 Oct 2026.
Prices by state
Set your state once and every price on this site is quoted for it, including GST. Then this page shows the TimberTech Vintage prices in your state: each the average of the sellers we track there.
TimberTech Vintage: national averages, across Australia
| Board size | Average $/m² | Per board | Sellers | Prices to |
|---|---|---|---|---|
| TimberTech Vintage 140 × 25, 4.88 m | $250.01 (assumes a 5 mm gap) | $176.80 / 4.88 m | 2 | |
| TimberTech Vintage 140 × 25, 6.1 m | $255.68 (assumes a 5 mm gap) | $226 / 6.1 m | 2 |
Prices from 3 sellers across Australia. We don’t list the whole market, so other sellers may have different prices. Seen 14–15 Oct 2026.
Prices include GST. Each is the average of the sellers we track for that board, each seller counted once, with any price more than 25% from the middle one left out; sample data is badged.
† Per m² assumes a 5 mm gap between boards: the brand doesn’t publish one.
How we get these prices
Each price is an average of the retail prices we have seen for that board, with any price more than 25% above or below the middle price left out. Each seller counts once. Prices include GST and are per square metre of deck (the board’s cover width plus the gap beside it) and per board. Prices were seen on the dates shown on sellers’ own price lists and websites; confirm with the seller before you buy. Price on request for TimberTech Vintage 140 × 25: no seller we track prices it yet.
Per lineal metre: TimberTech Vintage 140 × 25, 4.88 m average $36.25 · TimberTech Vintage 140 × 25, 6.1 m average $37.07.
Customer reviews
We publish every review that meets our review policy, positive or negative. Labels show when a reviewer was invited, got something for writing it, or works in the industry.
No reviews yet. Be the first to review it.
Documents
The maker’s own documents, linked where they publish them (never re-hosted).
The maker publishes no installation guide or warranty document we could link yet.
All 1 source behind this page
Facts are taken from the highest-ranked source (certificates and test reports, then install guides and datasheets, then warranties, then web pages); when sources disagree the specification says so, and safety facts take the conservative value. Every plan the designer draws from these figures is a concept plan, not for construction: the span tables behind its framing have been checked by a structural engineer, but a builder, building surveyor or certifier must check the plan before you build.